Microsoft Updates the Alt + Tab Experience of Windows 10 with Browser Tabs

Microsoft has recently released a new Windows 10 and Edge feature that was announced earlier this year at the Build developer conference.

It’s the updated Alt + Tab experience in the operating-system which now includes browser tabs as well, as long as Microsoft Edge is used for browsing.

Specifically, when you press Alt + Tab, rather than one generic thumbnail that permits you to switch to Microsoft Edge, you really get thumbnails for the websites that are loaded within the browser. This means that you are able to switch to a particular site much faster, without having to first go towards the app after which manually towards the website that you want to visit.

The good news is that Microsoft allows users to customize this multitasking behavior, so you’ll have the ability to do that in the Settings screen in Windows 10.

“We know Alt + Tab is sacred, so that you can choose whether or not to show all, some, or none of the tabs by going to Settings > System > Multitasking in Windows. All of your tabs are provided automatically, but if you discover that it is a bit much you are able to set Alt + Tab to only show the final three or five tabs instead. We’d love to hear which setting you want!” Microsoft says.

Only available for testers

Before you rush to the Settings app to allow the whole thing, there’s something you need to know.

This new feature is currently available for testers exclusively, so you must be running Microsoft Edge Canary or Dev build 85.0.561.0 or newer and Windows 10 build 20175 or newer. This particular Windows 10 build has recently been released towards the Dev channel, so if you’re not part of the Windows Insider program, there’s no other option rather than wait until Microsoft helps make the event available for everyone.

No ETA can be obtained for this at this time.

How to Customize the Action Center in Windows 10

Windows 10‘s Action Center offers a convenient way to access a variety of PC options, but its default setup might not be best for you. Fortunately, it’s not hard to cleanup Action Center, therefore it presents only the buttons you would like, and in the order of your preference.

This tidying can prove useful, as users are able to place the Tablet Mode action easier to reach, or hide the Project button when they don’t have a use for this. Here’s how to change the Action Center in Windows 10.

1. Click the Start button.
2. Click the Settings icon.
3. Click System.
4. Click Notifications & Actions in the left menu.
5. Drag and drop the Action buttons.
6. Click “Add or remove quick actions.”
7. Turn Quick Actions off or on to cover them in the Action Center.

You’ve customized the experience Center.

How to Add Custom Accent Colors to Windows 10

It’s not hard to change Windows 10‘s accent colors, the shades that come in your taskbar, Start menu, settings menus as well as in some window title bars. However, automatically, the operating system only allows you to choose from a predefined palette of 48 colors. If you want your taskbar to exactly match your company’s logo shade or, if your favorite hue of yellow isn’t one of the default four dozen, there are a couple of ways to add your own custom hue.

Add a Custom Accent Color Using the Mixer

Without having a precise color to complement and just want to fiddle with a few controls before you get an accent shade you like, you can use Windows 10’s color mixer. If you possess the RGB or Hex code for the color, you will need to use the other method: adding custom colors towards the registry.

1. Open the run prompt by hitting Windows + R or typing “Run” in to the search engine.
2. Type “Control Color” into the run box striking Ok.
A window appears having a list of colors.
3. Choose the color block that is closest to what you want. The window title bar will change to match that color.
4. Open “Show color mixer.”
5. Adjust the Hue, Saturation and Brightness bars before you obtain a color you like. As you move the sliders, you will notice a preview of the color in the window title bar.
6. Click Save Changes.

Give a Custom Accent Color Using the Registry

If you have an exact color you need to use as an accent color, you have to edit the Registry to add it. The “color mixer” method described above just isn’t precise enough.

1. Open the registry editor by typing “regedit” into run box or the search engine and hitting Enter.
2. Navigate to HKEY_LOCAL_Machine\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\ by opening the folders within the left pane.
3. Create the Accents key under Themes whether it doesn’t exist by right-clicking on the Theme folder and selecting New -> Key then renaming the important thing to “Accents.”
4. Open the Accents key.
5. Produce a subkey named “0” under Accents and another named “Theme0” under that.
6. Create a new DWORD (32-bit) value named “Color” under Theme0. You can create new DWORD values by right-clicking within the right pane deciding on New -> DWord (32-bit) and then renaming the entry it creates.
7. Open the colour DWORD value by double-clicking onto it.
8. Enter a color value in ABGR (also called KML) format and click OK. ABGR stands for Alpha Blue Green Red and it is composed of hexadecimal numbers. It will convert regular hex or RGB colors you get from a picture editor into ABGR.
9. Close Regedit and restart your computer.

The new color will appear at the end of the listing of hues in the Accent color menu.

You can include up to seven additional custom colors towards the menu by creating additional theme folders underneath the Accents type in the Windows registry. You need to name these Accents\0\Theme1, Accents\1\Theme0, Accents\1\Theme1, Accents\2\Theme0, \Accents\2\Theme1, Accents\3\Theme0 and Accents\3\Theme1.

How to Download & Install Mac OS Cursor in Windows 10

If you want Mac mouse cursors, you can set them up in Windows 10 too. Listed here are the steps you need to follow to install mac cursor in Windows 10.

The default cursor style in Windows 10 is pretty good. If you wish to, you can even change the cursor size. The good thing is, if you don’t like the default cursor style in Windows 10, you are able to change it out to anything you want using CUR files.

For example, compared to the regular pointer cursor, I like the gloved pointer in macOS. Should you too like the mac cursor styles, you can install them in Windows 10 making the Windows cursor seem like mac cursor. All you have to do is download mac OS Mojave cursor or mac OS high sierra cursor and add these to the Windows 10 pointer styles.

In this simple and quick post, let me demonstrate the procedure to install the mac mouse cursor in Windows 10.

How you can Install Mac Cursor in Windows 10

To make Windows cursor seem like mac os cursor, stick to the steps right here.

First, visit the Github page to download macOS Sierra cursors for Windows.
On the page, click the “Code” dropdown menu and select the “Download as zip” option. This can download the cursor pack.
After downloading the zip file, extract the folder in it towards the desktop.
Open the extracted folder.
Discover the “Install.inf” file.
Right-click around the “Install.inf” file and choose “Install”.
If you see a UAC (User Access Control) prompt, click “Yes”.
You’ve installed the mac cursors in Windows. You now need to apply them.
To apply mac os cursors in Windows, open the Settings app.
Go to the “Devices” page.
Visit the “Mouse” page.
Click the “Additional mouse options” link.
Go to the “Pointers” tab.
Select “macOS Sierra 200” from the Scheme dropdown menu.
Click “Ok”.

That is all. As soon as you click on the Ok button, Windows will apply the mac os cursors in Windows 10. Actually, you are able to instantly begin to see the new cursor for action.

When you are saving the changes, if you notice a Replace Scheme prompt, click “No”.

Restore Default Windows Mouse Cursor

If needed, you can reset the Windows cursors to its original scheme. Here’s how you can get it done.

Open the Settings with “Win + I” keyboard shortcut.
Go towards the “Devices → Mouse” page.
Click around the “Additional mouse options” link.
Go towards the “Pointers” tab.
Select “Windows Default (System scheme)” in the Scheme dropdown menu.
Click “Apply” and “Ok” buttons.

As soon as you save the changes, the default Windows cursor scheme is going to be restored. You will see the alterations instantly.

How to Enable Active Hours in Windows 10

To control when Windows 10 installs the updates and restart the system, you need to let the Active Hours in Windows 10. Here’s how.

The automated updates in Windows 10 are pretty helpful. They make sure your machine is up to date and always patched. However, one major problem with automatic updates is that the system might force reboot to accomplish the update installation. Though not a problem for the vast majority of users, it can be a inconvenience every so often. To avoid this type of behavior you have to switch on the Active Hours feature.

As you have seen in the name itself, Active Hours are hours that you make use of the computer. Once enabled, Windows is only going to install the updates outside the active hours. For instance, if you work on the body all day, say from 7 AM to 10 PM, you can set that point range as active hours. When the active hours are set, Windows will not install the updates until after 10 PM and before 7 AM.

As you can guess, the Active Hours feature is pretty helpful. Especially for home users who generally turn off their system at night time. In this simple and quick guide, allow me to demonstrate the steps to allow active hours in Windows 10.

How to enable active hours in Settings

The settings app in Windows 10 comes with an easy-to-use option to enable and configure active hours. Here’re the steps to follow along with.

Open the Settings with “Windows Key + I” keyboard shortcut.
Go to the “Update & Security” page.
Select “Windows Update” around the left panel.
Click on the “Change active hours” option on the right panel.
Turn off “Automatically adjust active hours based on activity” option.
Now, click on the “Change” link.
Within this window, set both Start some time and End time for active hours. The active hours are limited to 18 hours max.
Click the “Save” button.
Now, switch on the switch underneath the “Automatically adjust active hours according to activity” option.
Close the Settings app.
Restart Windows 10.

That’s all. You’ve successfully switched on active hours and configured it to restart when you are not while using system.

Should you open the Settings app and visit “Update & Security → Windows Security”, you will see current active hours timing under the “Change active hours” option.

How to enable active hours GPO in Group Policy Editor

You are able to enable and configure active hours in Group Policy Editor using the turn-off auto-start GPO policy. This is particularly useful if you want to enforce the rules and disallow changes in the Settings app. Keep in mind that the group policy editor is just readily available for Windows 10 pro and enterprise versions.

Below are the steps to turn on active hours in Group Policy Editor.

Open the Start menu by pressing the “Windows Key”.
Type “Edit Group Policy” within the search bar and select it from the Start menu.
After opening the audience Policy Editor, go to the “Computer Configuration → Administrative Templates → Windows Components → Windows Update” folder.
On the right panel, double-click on the “Turn-off auto-restart for updates during active hours” policy.
In this window, select the “Enabled” option.
Underneath the options section within the same window, set the Start some time and End time using the dropdown menus.
Click “Apply” and “Ok” buttons.
Close the audience Policy Editor.
Restart Windows to use the insurance policy settings.

After restarting the system, the Active Hours group policy is applied automatically. From now on, Windows will only restart the machine automatically outside the active hours to set up updates.

To disable active hours, select “Not configured” within the policy properties window.

How you can Switch on Active Hours in Registry

You can enable active hours in Registry Editor or registry key. Backup the Registry and follow the steps listed below.

Open the Start menu by pressing the “Windows Key”.
Type “Registry Editor” and then click it to open.
Now, copy the below registry path.
Paste the copied path within the Registry Editor’s address bar and press Enter.
Right-click on the “WindowsUpdate” folder and choose “New → Dword (32-bit) Value”.
Name the worth as “SetActiveHours”.
Double-click around the “SetActiveHours”
Type “1” in the Value Data field and click “Ok”.
Right-click on the “WindowsUpdate” folder again and choose “New → Dword value”.
Name the value as “ActiveHoursStart”.
Double-click around the “ActiveHoursStart” value.
In the Value Data field, type several between 0 and 23. The number range signifies 24-hours where 0 is 12 AM and 23 is 11 PM. For example, to set the beginning time to 7 AM, type 7 in the Value Data field.
Click “Ok”.
Right-click around the “WindowsUpdate” folder yet again and select “New → Dword value”.
Name the worth as “ActiveHoursEnd”.
Double-click on the “ActiveHoursEnd” value.
In the Value Data field, type a number between 0 and 23. The number range signifies 24-hours where 0 is 12 AM and 23 is 11 PM. For instance, to set the end time to 9 PM, type 21 within the Value Data field.
Click “Ok”.
Close the Registry Editor.
Restart Windows.

That is all. You are done creating the registry answer to enable active hours. In the future, Windows will automatically restart outside active hours to install Windows updates.

To disable active hours, double-click on the “SetActiveHours” value, type “0” within the Value Data field and click on “Ok”. Alternatively, you can also delete all three values.

Wrapping Up

That is it. As you can tell, Windows offers a number of different methods to turn on and from the active hours. Based on your use case, stick to the one you want. That said, I’d recommend you stick with the first method as it is simple to configure. If you want to enforce the rule then stick to the Group Policy method.

Alternatively, you may also completely stop Windows 10 from rebooting to set up updates whenever a user is logged in.

How to Restore My Computer Icon to the Windows 10 Desktop

Windows 10 improved upon its predecessors in many ways, but it changed a number of things that some users may have grown to rely upon. If you are one of those who miss the My Computer icon around the desktop, we have a way to bring that old reliable button back.

This trick doesn’t only help you to begin to see the drive-level of the PC, additionally, it allows you to bring other icons back. So rejoice, fans of the User interface and Network! Here’s how to restore the My Computer icon towards the desktop:

1) Right-click on the desktop and choose Personalize.

2) Click Themes.

3) Click “Go to desktop icon settings.”

4) Look into the box alongside Computer. You can also check the boxes for Control Panel, Network and User’s Files to bring the crooks to the desktop.

5) Click Apply.

6) Click OK.

7) Right-click about this PC.

8) Select Rename.

9) Type “My Computer.”

10) Click Enter.

Windows 10 Cumulative Update KB4565503 Fixes Thunderbolt Dock Issues

Microsoft has confirmed that Windows 10 cumulative update KB4565503, which was released included in this month’s Patch Tuesday cycle to devices running version 2004, or May 2020 Update, includes a treatment for a compatibility glitch with Thunderbolt docks.

The bug previously triggered an upgrade block for Windows 10 version 2004, meaning computers in which the issue may be experienced were not permitted to install the brand new feature update.

Microsoft explained that computers in which the block is bypassed and Windows 10 May 2020 Update is installed could hit a Blue Screen of Death fatal error.

“Intel and Microsoft have found incompatibility issues when Windows 10, version 2004 (the Windows 10 May 2020 Update) is used with certain settings along with a Thunderbolt dock. On affected devices, you might receive a stop error with a blue screen of death when plugging or unplugging a Thunderbolt dock. Affected Windows 10 devices may have at least one Thunderbolt port, have Kernel DMA Protection enabled and Windows Hypervisor Platform disabled,” the organization said.

Upgrade block removed

Upgrade blocks are typically put in place whenever Microsoft discovers a new issue hitting its latest feature update. They’re lifted when the bugs are resolved, which can typically take anywhere from one week to many months.

The most recent cumulative update for Windows 10 version 2004 thus resolves this problem with Thunderbolt docks, and Microsoft states that computers who have been previously blocked from the obtaining the new feature update can now download it normally.

However, worth knowing is that the upgrade block is “estimated to be removed in the future,” therefore if the May update still doesn’t show up in Windows Update on your device, just wait for a number of days until everything comes back to normal.

Updates via the Media Creation Tool should also be possible beginning today.

17-Year-Old Windows DNS Server Bug Fixed: What, When, Why

The July 2020 cumulative updates resolve a security bug in Windows Server which Microsoft describes as “wormable,” meaning attackers may use exploit kits that would eventually allow them to enter systems and compromise the DNS Server.

First of all, it’s vital that you know this can be a bug in the Windows Server DNS, also it was discovered by security point Check Point.

This can be a 17-year-old security flaw, also it has no effect on Windows clients, only Windows Server.

The following systems are impacted:

Windows Server 2008 Service Pack 2
Windows Server 2008 Service Pack 1
Windows Server 2012
Windows Server 2012 R2
Windows server 2016
Windows Server 2019
Windows Server version 1903
Windows Server version 1909
Windows Server version 2004

Microsoft has rated the flaw having a critical security label, and while the organization explains that it’s unaware of any attacks happening within the wild, it does admit that exploitation is more likely.

“A remote code execution vulnerability exists in Windows Website name System servers when they neglect to properly handle requests. An assailant who successfully exploited the vulnerability could run arbitrary code in the context of the neighborhood System Account. Windows servers that are configured as DNS servers are at risk out of this vulnerability. To exploit the vulnerability, an unauthenticated attacker could send malicious requests to a Windows DNS server,” Microsoft explains in CVE-2020-1350.

CSS Base score of 10.

Mechele Gruhn, Principal Security PM Manager, MSRC, recommends systems admins to turn to a registry-based workaround if patching isn’t possible at this time.

Worth knowing is that the flaw has been given a CSS Base score of 10, which is the maximum rating for any security vulnerability. This emphasizes precisely how important patching is really this time, and Microsoft warns that leaving a system without the security fixes could pretty much be a wide open invitation for malicious actors to break right into a computer.

Especially since the vulnerability gains more attention, that’s.

“We think about this to be a wormable vulnerability, meaning that it has the potential to spread via malware between vulnerable computers without user interaction. DNS is a foundational networking component and commonly placed on Domain Controllers, so an agreement could lead to significant service interruptions and also the compromise of high level domain accounts,” the organization says.

Check Point, the organization that discovered the vulnerability, reported it to Microsoft in May this season, therefore the company needed only two months to resolve it.

The safety vendor, however, warns that there’s a good chance cybercriminals would start looking into methods to exploit the flaw and explains that the probability of someone else also to be aware of the DNS Server bug is pretty high.

Exploitation is much more likely.

“We think that the likelihood of this vulnerability being exploited is high, as we internally found all of the primitives required to exploit this bug, meaning a determined hacker may also find the same resources. Additionally, some Isps (ISPs) may even have setup their public DNS servers as WinDNS,” they say.

Certainly, patching should be a priority for all system admins, even though it is obvious that this isn’t necessarily the simplest move to make, especially these days when some are still working from home due to the global health crisis. However, if patching isn’t possible, make sure that you check out the registry workaround linked to above, as this is the easiest and fastest method to prevent a possible exploit aimed at this flaw.

For the time being, Microsoft says it’s not aware of any attacks, however it is obvious that this could all change starting at this time, as cybercriminals might start looking in to the whole thing to find away out to break into Windows Server systems.

Microsoft Must Steer clear of the Microsoft Edge Ad Madness At this time

As many people know already, Microsoft has decided to rebuild its Windows browser using Chromium, the same engine that powers Google Chrome.

And while the transition from EdgeHTML leaves many disappointed, including Mozilla, switching to Chromium was something which allowed Microsoft to show Edge into a cross-platform browser expanding past the realm of Windows.

So right now, Edge is available on Windows 7, Windows 8, Windows 8.1, Windows 10, and macOS, and a Linux version can also be within the works. Technically, anyone running one of these os’s can download the browser manually and install it on their devices.

On Windows 10, however, things are a little bit different.

The new Edge replaces the old Edge because the default browser on Windows 10. Therefore, Microsoft does allow users to manually install the browser, but at the same time, additionally, it pushes it via Windows Update to people who don’t do it.

While for many this is considered a forced update, it’s not, and that i explained why at length in this article. Basically, so long as Microsoft provides users using the necessary way to block this update, it truly can’t be described as a forced update.

But however, Microsoft is going a bit too much with its aggressive marketing push that’s designed to convince users to try out the new Edge browser.

First and foremost, there are ads in the Start menu. While Microsoft calls them “suggestions” or “recommendations,” some users are provided having a message within the Start menu that prompts them to give the new Edge a go.

“Still using Firefox? Microsoft Edge is here,” this message reads.

Then, it’s an identical effort triggered when looking for Chrome or Firefox in Windows 10. At these times, Windows 10 does display the expected result, but in addition towards the said browsers, it also shows a “Recommended” entry that points to the new Microsoft Edge browser. This really is obviously an attempt to influence users from rival browsers and push more and more people towards the new Edge.

Microsoft is moving past the realm of Windows to convince individuals to install Edge. Bing, for example, uses its search results page for the same thing, which time, it’s getting a tiny bit ridiculous, as no less than three different “recommendations” are displayed when searching for another browser.

One of these, which will come by means of a banner at the end of the screen, looks a lot more like adware, and Microsoft itself has promised to check out the whole thing for a cleaner experience.

Another two get down to a “Promote by Microsoft” result that turns up at the top of the results along with a smaller link within the top right corner called “Get the new Microsoft Edge.” Having a simple mouse hover (not a click!), this link launches a popup that reads “The new Microsoft Edge was created to bring you the best of the net.” Clicking yes in this screen gets users to the Edge download page.

While at this time nobody knows for sure if the aggressive strategy works, there’s a chance that it backfires too. Many users seem to be rather angry using the company continuously insisting for that new browser, so some wind up blocking the brand new Advantage on Windows 10 entirely.

What’s even more odd is that some of these “recommendations” show up even for users who’re already running Microsoft Edge. Which means this unexpectedly-aggressive push keeps happening whether you surrender or otherwise. And without a doubt, Microsoft must stop this madness at this time.

How to Hide Your Name and Current email address on Windows’ Login Screen

If you’re utilizing a Microsoft account to log into your computer, Windows displays your real email address and name on the login screen. This is often a privacy concern–for example, with shoulder surfers when you are using your laptop in public–and it’s less secure than requiring you to definitely enter both your username and password to get into your pc. Listed here are two methods to hide this private information within the login screen.

The steps below work with Windows 8 and Windows 10 and will be applied to all user accounts on your PC. Note that if you are using Windows 10 Home edition, you will need to make use of the registry method, because you won’t have access to the Group Policy Editor.

Method 1: Edit the Computer Policy to cover Your User Information

1. Search for “Local Group Policy Editor” within the Windows taskbar and hit Enter.

2. Navigate to Computer Configuration > Windows Settings > Security Settings > Local Policies > Security Options.

3. Double-click “Interactive logon: Display user information once the session is locked”. This tells Windows which user information to exhibit around the login screen whenever your laptop is locked.

4. Select “Do not display user information.”

5. Click Apply then Alright to have this get into effect immediately.

6. Next, double-click “Interactive logon: Do not display last user name”. This tells Windows whether or not to display your user info when you boot your pc.

7. Alter the setting to Disabled and click on OK.

Method 2: Edit the Registry to Hide Your User Information

1. Search for “regedit” in the Windows taskbar and hit Enter.

2. Navigate to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System

3. Double-click dontdisplaylastusername.

4. Alter the 0 to 1 in the Value data field.

5. Click OK.

6. Right-click a clear area within the right panel and select New > DWORD (32-bit) Value.

7. Enter DontDisplayLockedUserID for that DWORD name.

8. Double-click DontDisplayLockedUserID.

9. Alter the 0 to 3 in the Value data field.

10. Hit OK.

Next time you log to your computer, your info will be hidden. To log in, you’ll need to complete both your username (current email address or your first and last name) and your password. It’s an extra step, only one lots of people may want to do for privacy or security reasons. While you are in internet marketing, you can disable the lock screen in Windows 10 too and obtain to the login screen more quickly.